Evolution Gun Works HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount 40 MOA 80104 Multiple Options w/ Free Shipping and Handling

This mount comes standard with a bevel on both sides making it ambidextrous.

The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

We recommend:

0 MOA - if shooting 0-500 yards

20 MOA - if shooting 500-1000 yards

30 MOA - if shooting 1000-1500 yards

40 MOA - if shooting 1500+ yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Specifications for Evolution Gun Works HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount 40 MOA:

Package Contents:

• Evolution Gun Works HD Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount 40 MOA
• #6-48 X 1/4" Screws
• #8-40 X 1/4" Screws
• T-10 Bit