Evolution Gun Works HD Picatinny Scope Mount, Weatherby Multiple Options w/ Free S&H — 4 models

Machined From:Solid 7075 T6 Aircraft Grade Aluminum Finish:Matte Black Only Compatible with Picatinny or Weaver scope rings.Mounting Hardware:#6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread:4.280" Overall Length of Mount: 6.670"Standard vs. HD railsOur Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR.This mount comes with a bevel on both sides of the ejection port, making it ambidextrous.The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our Weatherby Mark V TRR mount is 4.280". If this spread does not match, you may need our Standard Weatherby Mark V mount. The middle spread for our Standard Mark V mount is 4.485". Please see our separate listing for the Weatherby Mark V if you require the standard mount.All action lengths are available in 0 or 20 MOA.Werecommend:0 MOA -if shooting 0-500 yards20 MOA -if shooting 500-1000 yardsCustom silver anodizing is available upon request, for an additional charge of 15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.Add EGWs Practical or HD Scope Rings to make it a complete overhaul!We machine these in our shop using one of our made in specialized factories Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in specialized factories.Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Specifications for Evolution Gun Works HD Picatinny Scope Mount, Weatherby:

Package Contents:

• Evolution Gun Works HD Picatinny Scope Mount, Weatherby